文档介绍：Ո⿰ᆼᮤ∅ъ䇮䇑䍴ᯉˈ⅒䗾л䖭ُ䢤ʽʽʽ
㾷
ശⴈ࢚⭘Ҿ࢚࠷ᑖᶀⲴ䗩䜘઼ᢺᇭᑖᶀ࠷࠶ᡀゴᑖᶀ,㻛ᒯ⌋⭘൘ᶯᑖ⭏ӗ䖖䰤઼
䖵ࣙъᵪ㓴ѝ,ྲ⁚࢚ᵪ㓴ǃ㓥࢚ᵪ㓴ǃ䟽ধᵪ㓴ǃ䞨⍇ᵪ㓴ǃ䭰䭑ᵪ㓴৺✺᧕ᵪ㓴
ㅹDŽശⴈ࢚ᐕྭൿⴤ᧕ᖡ૽ࡠӗ૱Ⲵ䍘䟿DŽ↔⅑䇮䇑Ӿᇎ䱵ᐕ⧟ຳࠪਁˈ⺞ᇊҶ᰾
Ⲵ∅ъ䇮䇑ᯩੁDŽᒦሩശⴈ࢚࠷ᵪ൘֯⭘ѝ㓿ᑨࠪ⧠Ⲵ䰞仈ᴹаᇊⲴ⹄ウˈфᓄ⭘൘⺞
ࡋᯠ䇮䇑䇑㇇ѝDŽᐢ㓿ᔰሩ䈮仈䘋㹼䇮䇑䇑㇇ˈᒦᴹҶケᙗⲴ䘁ኅˈ䇮䇑䗷〻ᐢ㓿
ᘛ䙏Ⲵኅᔰˈ⺞ᇊҶᐕⲴᇩ઼ᯩ⌅DŽ਼ᰦˈᐢ㓿ᆼᡀޣ䍴ᯉⲴḕ䰵ˈሩ䈮仈ᴹҶ
ᙫփ࠶᷀DŽ䇮䇑ᙍ䐟ᐢ㓿ᖸ᰾⺞ˈᒦᴹҶаᇊⲴ䘋ኅDŽശⴈᔿ࢚࠷ᵪ⭡Ҿ࠰⡷ᱟ䖜Ⲵ
ശⴈˈഐ㘼ਟ䘎㔝㓥ੁ࢚࠷䘀ࣘ䫒ᶯ઼ᑖ䫒DŽശⴈᔿ࢚࠷ᵪ䙊ᑨ䇮㖞൘㋮ᮤъ㓯к⭘
Ҿሶ䘀ࣘ⵰Ⲵ䫒ᶯ㓥ੁ䗩㕈࠷喀઼࢚࠷ᡆ㘵࠷ᡀゴᑖ䫒ˈṩᦞަ⭘䙄ਟ࠶Ѫ࢚࠷ᶯ䗩Ⲵ
ശⴈ઼࢚࢚࠷ᑖ䫒Ⲵശⴈ࢚.DŽ䘉⅑䘹ശⴈᔿ࢚࠷ᵪѪ䇮䇑仈ⴞᱟ൘ሩ 1700 ⁚࠷ᵪ㓴
Ⲵ䈳⹄Ⲵ㛼Ჟл䘋㹼ⲴDŽ1700 ⁚࠷ᵪ㓴֯⭘ཊᒤˈަѝശⴈ࢚֯⭘䗷〻ѝᆈ൘аӋ䰞仈DŽ
䈕লሩ䈕࢚࠷ᵪҏ䘋㹼Ҷཊ⅑᭩䙐DŽശⴈ࢚֯⭘䗷〻ѝՐࣘ㌫㔏㋮ᓖᓅˈᖴੁ䈳ᮤᵪᶴ
䈳ᮤ㋮ᓖվˈ䘛࠷㾱≲ᴤᯠ઼᭩䙐䇮䇑DŽੁח⡷࠰઼
䈳ᮤᵪᶴˈ⢩࡛ᱟњᵪੁח⡷䘉⅑䇮䇑ⲴⴞⲴቡᱟ䙊䗷䇮䇑ሩѫ䖤Րࣘ㌫㔏ˈ࠰
ᶴѝⲴՐࣘ䜘࠶䘋㹼䇮䇑DŽ䙊䗷䇮䇑䗷〻ᦼᨑശⴈ࢚অփᵪỠ䇮༷Ⲵ䇮䇑ᯩ⌅ˈ֯ᡰᆖ
Ⲵ⨶䇪⸕䇶઼ᇎ䱵㔃ਸ䎧ᶕˈᨀ儈䇮䇑㜭࣋ˈ⤜・࠶᷀㜭઼࣋㔈മᢰᵟˈ䘋㹼㿴㤳ॆⲴ
Ⲵ䇝㓳ѪӺਾⲴᐕᢃлᴹ࣋ⲴสDŽ
ޣ䭞䇽˖ശⴈ࢚࠷ᵪ喯䖞Րࣘ㌫㔏ᵪỠ䇮䇑✝䖗䫒ᶯ
Ո⿰ᆼᮤ∅ъ䇮䇑䍴ᯉˈ⅒䗾л䖭ُ䢤ʽʽʽ
Abstract
Disc cut for shear edge strip and wide strip cut into narrow strip, widely used in strip
production plant and auxiliary operating units, such as cross cut unit, slitting machine,
recoiling unit, pickling units, tinning unit, and the welding unit. Disc cut a direct impact on
the quality of the product. The design starting from the actual working environment, to
determine a clear direction of graduate design. Recurring problems and disc shearing machine
in use has done some research, and application of innovative design calculations. Design
calculations has already begun on the subject, and made a breakthrough in nearly exhibition
design process has to start quickly to determine the content and methods of work. At the same
time, pleted the inspection of the relevant information, has been the overall analysis
of the subject. Design ideas have been very clear, and there had been some progress.
Disc-type shearing machine blade is a rotating disk, which can be continuous vertical shear
movement sheet and strip. Disc shears are usually set for the movement of the plate
longitudinal edges cut flush cut or cut into narrow steel finishing operations online can be
divided according to their uses scissors and cut the disc side of the clipboard