文档介绍：IonOptix安装说明书
Self-Installing IonOptix Hardware/Software
IonWizard 6x, Mutech, RTD2710 on Windows XP
Nostart
3. Click next
4. Click yes to accept the
license
5. Click next to confirm
6. Click next to accept default
installation directory of
c:\mv-500
7. Click next to do a typical
installation
8. Click next to accept program
folder name “mutech”
9. Press next to start
10. Once completed you will be
asked to reboot your
computer select “no” then
click “finish”
Next you will install the IonWizard files….
1. Open the drive/folder
containing the files from step
#2 and double-click on
iwiz-
Note the actual name of the
file will vary based on the
date it was released
2. After unpacking you will see
this message, click ok
5. Insert the Cards
Be sure to power down the computer be inserting any cards!
Install the Mutech and RTD cards in any available slots. Be sure to screw in (or clip for some cases) the card supporting bracket to the back of the case so the cards do not work free.
6. Load the drivers
The first time that you boot the computer after inserting new hardware Windows will automatically start the process for selecting and loading the driver. Windows will automatically recognize the PCI Mutch frame grabber. You will see a “ballon” in the lower right-corner of the screen.
To install driver for the “Mutimedia Controller” (Mutech) driver….
1. Select “no” you don’t want to search
windows update and click next.
2. Select “Install from a list or specific
location (Adanced)” the click next.
3. - Select “search for the best…”,
- uncheck “search removable media…”,
- check “include this location…”
- enter or b