文档介绍：Visteon Corporation
Customer Specific Requirements
For Use With ISO/TS 16949: 2002
Visteon Corporation Customer Specific Requirements to
ISO/TS 16949:2002
Introduction
Quality professionals from Visteon collaboratively developed this document. The content of the document was developed using the Customer Specific Documents of several automotive OEMs and with the consultation of the Joint Task Force for Supplier Quality, Automotive Industry Action Group (AIAG).
Key contact for interpretation of this requirements document is:
Visteon Corporation:
Supplier Development / Performance Manager
Visteon Technical Center
16630 Southfield Road
Allen Park, MI 48101
Fax: 313-755-9644
Email: supplierperformance@
2. Customer Requirements Document Structure
This document is structured as panion document to ISO/TS 16949:2002. The paragraphs to this document mirror the paragraphs to ISO/TS 16949:2002. Where guidance by the customer is referenced, a requirement will be stated to clarify Visteon interpretation. For suppliers of ponents, the Customer Specific Requirements (ISO/TS 16949:2002) modity uses this same structure and should be used as panion requirements document to this document and ISO/TS 16949:2002. The requirements of all three documents must be met where applicable.
Some additional requirements are contained in the Annex B, which is not auditable by registrars. The contents of this entire document are considered requirements for doing business with Visteon and should be implemented even if anization is not registered to ISO/TS 16949:2002. In second party audits, the expectation of Visteon is that all these requirements (where applicable) are implemented.
Reference Documents
The following reference documents are available through AIAG (248-358-3003) or Carwin Continuous (UK) in Europe (44-1-708-861333) and shall be used to develop the quality system. The AIAG reference manuals to the latest edition shall also be used.
Production Part Approval Process,