文档介绍:比磁饱和强度分析仪
独特的磁体比饱和磁化强度自动检测
实现 350mm 硬质合金棒材无损分段检测
型号:SJ-SM-2000RB
韩国锡珍工业公司中国办事处
广州市天河区长兴路长湴新村东二街18号201室
Tel : ********** E-mail:angelbiner@
SJ-SM-2000RB 产品性能描述
General
SJ-SM-2000RB is new and specially designed for the measurement of 4πσ of tungsten
carbide pletely without any breaking or cutting of it.
As we know, the existing 4πσ measurement system has been used generally for the quality
control plete rod so far by measuring small sample taken out of it.
Or prepare some small samples separately with same materials and alloy them under
same sintering condition in furnace and measure 4πσ for the quality assurance.
And this result has been referred to be judged for its quality whether it is good.
Even we have used this existing method though, we already know that this is not a
practical method for plete rod.
SJ-SM-2000RB will provide a practical solution. It plete rod with the
from one end to the other end entirely and display the curve which is the profile of 4πσ
for the total length.
Then you will see the variation of 4πσ of plete rod both in curve and data.
Description
SJ-SM-2000RB is designed as an automatic measurement system from sample
alignment on the bed, sample loading into the to sample out.
Systems for the sample delivery to the bed for its alignment and sorting out depends on
the measuring result are separately designed as an option that should be equipped and
installed for 100 % inspection on the production line. But this part could be designed by
yourself.
-1-
SJ-SM-2000RB is belt driving(lower and upper) system driven by motor basically and
pneumatic systems are also used for sample alignment, holding, tension and etc.
Weight entry of the sample can be set either by automatically through the electronic
balance connected with puter or manually by typing the weight using numerical key.
Sample le