精品高性能气调保鲜包装用CPP热封膜的研制.pdf

文档介绍：第卷第期中国塑料
25 10 ,
2011年10月 CHINA PLASTICS
高性能气调保鲜包装用CPP热封膜的研制
林渊智1 陈文韬1 陈盛1 史凤烟2
, , ,
(,福建福清 350300;,福建福州 350014)
摘要采用低熔点材料如聚烯烃弹性体聚烯烃塑性体茂金属聚乙烯与三元共聚聚丙烯
: (POE)、(POP)、(mPE)
(PP)共混作为热封层,并添加适量的爽滑剂克服薄膜发黏的问题,采用三层共挤流延法制备了高性能气调保鲜用流
延聚丙烯热封膜结果表明采用作为低温热封材料时与三元共聚的相容性较好增韧效果明
(CPP) 。, POE-868 , PP ,
显添加份和份爽滑剂熔体温度控制在冷却辊温度控制在制备的薄膜的
; 12 POE-868 2 , 245~255℃, 22℃, CPP
各项性能均符合指标要求,其始封温度低于102℃。
关键词聚丙烯热封膜流延气调包装聚烯烃弹性体热封温度
: ; ; ; ; ;
中图分类号+ 文献标识码文章编号
: 4 :B :1001-9278(2011)10-0069-03
Development of CPP Heat-sealing Film for Modified Atmosphere Packaging
LIN Yuanzhi 1,CHEN Wentao1,CHEN Sheng1,SHI Fengyan2
( Branch of Fujian Normal University,Fuqing 350300,China;
GT Co,Ltd,Fuzhou 350014,China)
Abstract:Polyolefin elastomer (POE),polyolefin plastomer,metallocene polyethylene blended
with polypropylene terpolymer as low-temperature heat-sealing layer,heat sealing polypropylene
casting films for modified atmosphere packaging were prepared via three-layer co-extrusion casting
showed that the properties of obtained films met the requirements,and their heat-
sealing temperature was under 102℃,while the heat-sealing layer posed of polypropylene
terpolymer blended with 12phr POE-868and 2phr anti-blocking slip additive,melting temperature
was controlled betw