文档介绍：THE TECHNICAL PROPOSAL
FOR QTY 1 OR1e ORBISe GAUGE
Using in
提供一台OR1e型ORBISe测径仪的技术方案
DATE: January 2007
日期: 2007年1月
CONTENTS
目录
GENERAL DISCRIPTION
概述
TECHNICAL SPECIFICATION OF THE EQUIPMENT AND EXPLAIN
技术特征及介绍
3. SCOPE OF SUPPLY FOR BOTH PARTY AND SPECIFICATION
双方供应范围及说明
4. THE DESIGN OF BOTH PARTY AND RESPONSIBILITY
双方设计及责任
5. TECHNICAL DOCUMENTATION PRESENT BY SELLER TO BUYER AND SCHEDULE
卖方向买方交付技术文件及时间表
6. TECHNICAL DOCUMENTATION PRESENT BY BUYER TO SELLER AND SCHEDULE
买方向卖方交付技术文件及时间表
7. DISPATCHING OF PERSONNEL
派遣人员
8. TRAINING
培训
9. PERFORMANCE GUARANTEES AND ACCEPTANCE
性能保证及验收
DELIVERY AND SCHEDULE OF PROJECT
交货及项目时间表
GENERAL SYSTEM LAYOUT
现场配置图
MENDED SPARES PARTS PRICE LIST
推荐配件价格清单
14. REFERENCE DRAWING
参考图纸
15. REFERENCE INSTALLATION IN CHINA
中国业绩一览表
GENERAL DISCRIPTION
概述
Introduction of the project
项目引言
This technical appendix is for the gauge using 2nd wire rod mill of Chengde Steel Group (Hereafter called buyer) for following basis condition:
本技术附件为按如下基本条件为承德钢铁集团有限责任公司(以下称为买方)二高线工程所需测径仪所做:
Item
序号
Project
项目
Measuring size( mm)
测量尺寸
Rolling speed
(M/S)
轧制速度
Temperature
(℃)
温度
Qty
数量
1
Gauge after finishing block of bar mill
精轧机后用测径仪
4-20
0-115
400-1200
1
The SHAPE TECHNOLOGY LTD, UK (hereafter called the seller) is the world leader in the design, development and manufacture of steel gauging product. Utilising years of experience in this industry- hot rolling bar and bar size and shape measurement on line to drive their technology to even greater lever of accuracy in high speed and hot condition. Therefore the gauge will be supplied to the buyer will mate all working condition and functions.
英国SHAPE TECHNOLOGY LTD (以下称卖方)是世界领先的设计、开发和制造钢铁测量系统的专业公司。在热轧棒棒材尺寸和形状在线检测上的经验使其测量系统在高速和高热环境中达到最高动态精度。因此向买方提供的测径仪将符合所有工作环境和功能。
Factory site condition
工厂现场环境
All gauge supplied will be installed at specified area of the rolling lines required to monitor any change of the rol