文档介绍：《工业控制计算机》2010 年第 23 卷第 7 期 1
基于机器视觉的圆环形零件形位尺寸自动测量
Measurement of Circular Ring Parts' Form and Position Size Base on Machine Vision
刘科文周平付斌斌 (浙江理工大学信息电子学院,浙江杭州 310018)
摘要
采用机器视觉技术实现对圆环形零件内外径和同心度的非接触式测量。使用 200 万像素 USB 数字摄像机获得零件图像,对图像采用双峰法寻找到合适的阈值将图像二值化,运用轮廓跟踪法找到零件的边缘,对边缘数据采用最小二乘法拟合求出零件的内外径和同心度。对 1~2cm 外径的零件进行实验,绝对误差小于一个像素,与人工测量值对比,最大误差不超过。研究结果表明:在机器视觉测量中,摄像机的像素越大、被测物体尺寸越小,则测量精度越高,所以采用高分辨率的摄像机可以实现对高精度的微小零件测量。
关键词:零件测量,机器视觉,数字图像处理,最小二乘法
Abstract
In this paper,technology of machine vision is used to measure circular ring parts' inside and outside diameter and picture of parts is got by 2 million-pixel USB digital processing,firstly,using bimodal method to find appropriate threshold to get binary ,using contour-tracing method to find edge of the parts;thirdly,us- ing the edge data to get the parts' inside and outside diameter and concentricity through least-squares of 1 ~2cm diameter parts,absolute error is less than one largest error is less than with the manual results show that:In the machine vision measurement,the higher the camera's pixel level is and the smaller size of the measured object is,the higher the measurement's high level pixel camera can be used to measure high-precision small parts.
Keywords:parts measurement,machine vision,digital image