文档介绍：血库标准操作规程(SOP)
2011-01修订
目录
第一章血库仪器标准操作规程
第一节 Dianafuge标准操作规程···········································3
第二节 80-2离心机标准操作规程·········································3
第三节 CU600型电热恒温水箱标准操作程序································4
第四节 SANYO MBR-107D(H)贮血冰箱标准操作程序······················4
第五节 Haier 低温冰箱标准操作程序······································4
第六节海尔冰箱标准操作程序··········································5
第七节医院血库管理软件应用标准操作规程································5
SJW系列数码恒温血小板振荡保存箱标准操作规程·····················6
第九节 WGH-I型数码恒温解冻箱标准操···································6
第二章血库项目标准操作规程
第一节血样采集和送检、血型复查及血源组织标准操作程序····················7
第二节 ABO&Rh(D)血型复检标准操作规程·······························8
第三节 Rh血型鉴定标准操作程序········································9
第四节红细胞血型抗体筛查标准操作规程·································11
第五节抗人球蛋白试验··············································14
第六节血液交叉配血试验标准操作规程··································15
第七节血液出库(发血)标准操作规程···································17
第八节数据记录及费用收取标准操作规程·································17
第九节血液申领、入库、核对、贮存标准操作规程···························19
第十节血液报废(失效)标准操作规程····································19
第十一节输血反应处理标准操作规程······································20
第十二节实验室消毒和污物处理标准操作规程·······························21
第十三节血库交接班标准操作规程·······································21
第十四节血液质量管理标准操作规程······································22
第十五节血库夜班操作规范·············································23
第十六节应急预案操作规程·············································24
第十七节贮存式自身输血(PABD)标准操作规程····························26
第十八节临床医师用血申请操作规程······································28
第十九节临床护士输血操作规程·········································28
血库标准操作规程
第一章血库仪器标准操作规程
第一节 Dianafuge标准操作规程
一、Dianafuge标准操作规程
(一)Dianafuge 开/关机程序
把仪器电源开关拨到“Ⅰ”(开)的位置,开始正确运行。
把仪器电源开关拨到“0”(关)的位置。
(二)Dianafuge标准操作程序
离心机应放置于水平台桌上,电源(压)须匹配。
,先按OPEN,此时门盖打开,放入检测卡(需对称放置),放入完毕后,用手把门盖按下,然后按START,离心机开始转动,10分钟后自动报警开门盖,取出卡片,最后把门盖按下关好。
二、Diana-Incubator 标准操作规程
(一)Diana-Incubat