文档介绍：National Standard of the People's Republic of China
Motor vehicle----Symbols for
controls, indicators and tell-tales
GB 4094-1999
Replaced GB 4094-1994
1 Scope
This standard specifies the symbols and their location of the motor vehicle controls, indicators
and tell-tales, and the basic requirements for the colour of the tell-tales.
This standard applies to the vehicles of categories M and N.
2 Normative reference
The following normative documents contain provision which,through reference in this
text,constituted provisions of this indicated version is valid when the GB is
to agreements based on this standard are encouraged to investigate the
possibility of apply the most recent editions of the document indicated below.
GB/T 4782-1984 Road vehicle----Controls, indicators and tell-tales----vocabulary
3 Definition
The relative definitions specified in GB 4728 shall be used as the definitions of this standard.
Symbol
A diagram identifying a control, an indicator or a tell-tale.
Conformable symbol
A diagram proportional to the diagram specified in in dimension.
4 Specification
General specification
The symbols specified in shall be used provided that the controls, indicators and tell-tales are
installed on motor vehicle. The symbol must be indicated and meet the requirements of .
The symbols specified in shall be used provided that the controls, indicators and tell-tales are
installed on motor symbol is mended ,and must meet the requirements of if
indicated.
In case of using fortable symbols, the requirements in the 5th chapter of this standard
shall also be met.
The basic pattern of the symbols shall be in conformity with the prescription in Annex A
(Supplement).
The symbols must stand out clearly against the background and permanently.
Multi-functional control may be identified b