文档介绍：中国矿业大学银川学院
2012 届本科毕业设计(论文)
题目华亭东华镇煤矿综采工作面供电系统设计
所在系机电动力与信息工程系
专业班级工业工程(2)班
姓名王范围
指导教师孟庆春
教务处制
摘要
通过综采工作面选定的配套机械设备,正确选择配套的电气设备,以保证综采设备能够正常地投入运行。
综采工作面供电是否安全、可靠、技术和经济合理,将直接关系到人身、矿井和设备的安全及采区生产的正常进行。由于煤矿井下工作环境十分恶劣,因此在供电上除采取可靠的防止人身触电危险的措施外,还必须正确地选择电气设备的类型及参数,并采用合理的供电、控制和保护系统,加强对电气设备的维护和检修,以确保电气设备的安全运行和防止瓦斯、煤尘爆炸。
综采工作面供电系统设计中,遵循煤矿企业对供电的基本要求及《煤矿井下供电设计技术规定》。根据工作面用电设备的技术参数,对移动变电站进行选择计算、高压低压电缆进行选择计算、高压低压开关进行选择、短路计算及继电保护装置进行整定。
关键词:综合机械化采煤;负荷统计计算;设备选型;移动变电站.
ABSTRACT
Mechanized mining face by supporting selected mechanical equipment, electrical equipment supporting the right choice to ensure the fully mechanized mining equipment to normal operational.
Fully mechanized coal mining face power supply is safe, reliable, technical and economic rationality, will be directly related to the physical, mines and equipment, safety and production of normal mining area. As the coal mine working environment is very bad, so in addition to the power supply on the risk of electric shock and reliable measures to prevent the physical, but also have the right to choose the type of electrical equipment and parameters, using reasonable power, control and protection systems, strengthen electrical equipment maintenance and repair to ensure the safe operation of electrical equipment and to prevent gas and coal dust explosion.
Working Face the design of power supply system, follow the mine's basic requirements for power panies and the "technical requirements of Mine Power Design." Face of electrical equipment according to the technical parameters of the mobile substation to select terms, selection and calculation of high voltage low voltage cables, high pressure low pressure switch to choose short-circuit calculations and protective device setting.
KEY WORDS: Mechanized coal mining;Load puting;Equipment Selection;Mobile Substation.
目录
1 绪论 1
综采工作面供电概述 1
概述 1
综采工作面负荷统计 2
2 选择变压器 3
1#变压器容量的选择 3
2#变压器容量的选择 3
3#变压器容量的选择 4
3 选择高压电缆 5
计算公式及参