文档介绍：理光打印机维修代码(Light printer maintenance code)
1. SP maintenance mode
Into the way: the C 107 CV key press more than 3 seconds, enter 1, copy, and then press the required Numbers into the way of maintenance, exit according to the yellow one copy of the C key to get into the normal way
SP1 (feed mode)
001: the head edge is opposite to the position [--/level] [1] carton delivers paper, [2], paper, [3], double-sided paper
002: right and left aligned [--/level] [1] first paper, [2], [3], [3], [4], [4], b0, [6]
003: time the paper, adjust the bending of the paper. [1] first carton delivers paper [0-10/5/1 MM/level] [2], 2, 3, 4
[0-10/5/1 MM/level] [3] hand feed [0-10/5/1mm/level]
[4] double side [0-20/6/1mm/stage] 007: display of paper size
103: motion of the fixed shadow [0 = no / 1 = is]
Adjustable [1] standby [160-190/175/1 degree/level] [2] energy level 2 [0-100/60/1 degree/level]
106: the fixing temperature shows
The adjustment of [1] for fixing the soft start of the fixing system [0 = 3 cycles / 1 = 10 cycles / 2 = 20 cycle [2] standby [0 = 3 cycles / 1 = 10 cycles / 2 = 20 cycles
108: adjustment of fixing soft start [0 = 1 s / 1 = 3 seconds]
109: check of fixed shadow band [0 = stop / 1 = start]
902: AC frequency display 903: the paper clutch is connected to [1] hand delivery box [0-10/6/1 MM/grade] [2] 1, 2, 3 carton [0-10/3/1 MM/stage]
908: adjusting the paper plate, adjusting the reversal time of the lifting of the upper and lower carton. [1] 1 optional [-2 - + 2/0/1 / level] [2] 2 optional [-2 - + 2/0/1 / level]
SP2 (drum unit)
001: the deflection of the charging roller adjusts the [1] printing period [-2100-1500 / -1700/1V/stage] [2] ID sensor graphics [0-400/300/1v/level]
The edge of [1] head [0-9/3/] [2] tail edge [0-9/4/1/] [3] left edge [0-9/2/] [4] right edge [0-9/2/]
The [1] print [-1500-200/650/1v/stage] [2] ID sensor graphics [-2 = LL: 220V / -1 = L: 260V / 0 = N: 300V