文档介绍：En kang metal products co., LTD
攻牙作业指导书Tapping wi 版次Rev: 1
file number /DOC Number:NK-C-B-14-05-01-1 生效日期/Effective date:2014-05-01
适用机种/Mode All the models 工站名称 Process 攻牙tapping
Customer name HJ 使用工具 Use Tools 攻牙机Tapping machine 牙规 Tooth gauge
物料Material 名称/Name 料号/(P/N) 规格/Specification 数量Quantity 备注/Remark .
1 CHASSIS MAIN HNSR0303200 N/A N/A
2 BRKT DECK HAET1401400
步驟/Step 操作內容Fuck for content 注意事項/Notices
1 点检攻牙机攻牙机开关正常,气压和供油正常。
tally tapping machine Tapping machine, switch to normal air pressure and oil supply is normal
2 检查来料规格料号正确,外观无10厘米以上明显刮伤,无变形。
Check the ing material Specification material number is correct, look no more than 10 centimeters obvious scratch, no deformation
3 将来料放入专用夹具中,定位放好,装好所需丝攻。做好工件堆放和机台旁的辅助台清理的工作.
Material to be included in the special fixture, positioning and installed the screw tap Make workpiece stacking and beside the machine auxiliary machine cleaning work
4 送料进行试产。生产至少5PCS,确认生产无异常。做好工件定位,丝攻和供油到位,通知好品质人员进行首检
Feeding testing. Production at least 5 PCS, confirm production without pletes the workpiece positioning, screw tap and oil in place, first inspection notice good quality staff
生产顺畅;工件首检合格。Production flow; Artifacts first inspection qualified.
5 工件传递和放置确定好,进行连续作业进行生产。操作人员随机抽检,每30个至少检查一次,发现不良及时停机确认。
Artifacts and determine well placed, co