多种钥匙齿形自动识别系统的设计与实现(精选).pdf

文档介绍：机械设计与制造
第 12 期
2009 年 12 月 Machinery Design & Manufacture 51
文章编号:1001-3997(2009)12-0051-02
多种钥匙齿形自动识别系统的设计与实现
倪峥
(合肥工业大学机械与汽车工程学院,合肥 230009)
Design and realization of automatic identification system for multiple key shapes
NI Zheng
(School of Mechanical & Automotive Engineering,Hefei University of Technology,Hefei 230009,China)


【摘要】对锁芯自动装配系统的钥匙齿形自动识别系统进行了改进,设计和制造了能同时识别多


种钥匙齿形的组合夹具,编制了具有拓展功能的齿形识别系统软件。应用表明,所开发的钥匙齿形自动识


别系统准确性很高,确保了锁芯自动装配系统的效率

。

关键词:齿形;夹具;识别;软件


【Abstract】The automatic identification system of key shape in the lock auto-assembly system was

,

developed a built-up jig was designed and manufactured which could be used in the identification of mul-

tiple key shapes,and a software for identification system of key was developed which had expanding func-

tions. The application shows that the accuracy of the automatic identification system for multiple key


shapes is high and the efficiency of auto-assembly system can be ensured.



: ; ; ;

Key words Key shape Jig Identification Software
中图分类号:TH12 文献标识码:A
1 引言际上仅分为 2 种。在这 2 种钥匙齿形中,每种齿形具有 3 种不同的
齿形高度,如表所示钥匙齿形识别,就是用有效的方法自动读出
汽车车锁是汽车重要的安全防盗部件,按用途可分为点火 1 。
钥匙齿形的高度,并将其转化为齿形代号(齿形码)。在装配锁芯时,
锁、门锁、后备箱锁等等。装配完成后的汽车车锁一般包