文档介绍:文件类型
Document type
文件页数
Pages
版次
Version
修订说明
Revision note
受控编号
Controlled number
GH
20
1版
Version1
首次
1st
储罐充水试压方案
Tank Hydro-test Plan
2
2012年11月1日
Nov. 1, 2012
版次Edition
日期
Date
编制Formulated by
审核
Reviewed by
批准
Approved by
中国化学工程第十三建设有限公司
The 13th Construction Co., Ltd. CE
储罐充水试压方案
Tank Hydro-test Plan
目录Contents
一 适用范围Range of Application 2
二 编制依据Formulation Basis 2
三 工程概况General 2
四 施工工序Construction Procedure 3
五 施工步骤及方法Construction Procedure and Method 4
检查内容Check the contents: 4
准备工作Preparatory work: 4
充水试验应符合下列规定The hydro-test shall be pliance with following regulations.......5
水压试验示意图Hydro-test Diagram 6
充水过程检查Inspection for Water Filling Process 7
充水试验方法Hydro-test method 8
基础沉降观测Foundation Settlement Observation 10
放水检查 Inspection for Water Draining 12
试压技术要求Technical Requirements for Pressure Test 13
六 质量管理Quality Management 13
质量保证体系Quality Guarantee Measures: 13
质量保证措施Quality Guarantee Measures: 14
七 质量管理Quality Management 15
安全保证体系Safety assurance system: 15
安全保证措施计划Planning for safety assurance measures: 16
八人力计划VII. Planning for Labor Forces 18
九机具准备 VII. Preparations of Machines and Tools 18
十工作危险源分析评估及预防Work-related Hazard Analysis Evaluation and Prevention 19
of Application
(南京)乙酰基中间体有限公司工业乙醇项目八期改造扩建罐区4台储罐的充水试验的施工。This plan is applicable to the execution of the hydro-test for 4 tanks in the modification and expansion of the tank farm of Celanese China Fast Project.
Basis
1) 《钢制焊接常压容器》Steel Welded Atmospheric Pressure Vessels JB/T4735-1997
2) 《立式圆筒形钢制焊接油罐施工及验收规范》Code for Construction and Acceptance of Welded Steel Oil Tank of Vertical Barrel Shape GB50128-2005
3) 《石油化工钢储罐地基与基础施工及验收规范》Specification for Construction and Acceptance of Steel Storage Tank Subgrade & Foundation in Petrochemical Industry SH3528-93
4) 《大型焊接低压储罐设计与建造》Design and Construction of Large, Welded, L