1 / 5
文档名称:

船舶斜梯梯口尺寸分析.pdf

格式:pdf   页数:5页
下载后只包含 1 个 PDF 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

船舶斜梯梯口尺寸分析.pdf

上传人:用户头像没有 2015/9/22 文件大小:0 KB

下载得到文件列表

船舶斜梯梯口尺寸分析.pdf

文档介绍

文档介绍:第 24 卷第 5 期(总第 143 期) 船舶
2013 年 10 月 SHIP & BOAT October,2013
[船舶舾装/疏浚/涂装]
船舶斜梯梯口尺寸分析
郝绍瑞
(中国船舶及海洋工程设计研究院上海 200011)
[摘要] 船舶总布置设计时,通道内布置了许多斜梯,斜梯斜度与梯口长度只有协调配合才能获得良好的通行效果。基于规范
要求、现行标准的推荐尺寸及实船经验进行分析讨论,提出既利于工作、战斗和逃生需求,又便于生活的设计建议。
[关键词] 斜梯;倾斜角;梯口长度;人机工程学舾装设计
[中图分类号] [文献标志码] A [文章编号] 1001-9855(2013)05-0077-04
Analysis of opening size for ship inclined ladders
HAO Shao-rui
(Marine Design & Research Institute of China,Shanghai 200011,China)
Abstract: Many inclined ladders are arranged in passages during the ship general arrangement design,the opening
size of inclined ladders should be assorted with its angle of inclination for good passing effect. This paper makes
discussion and analysis based on the regulation requirements,suggested size from the current criterion and experience
from the actual ship experience. It also provides suggestions for the design benefits of bat,escape and living.
Keywords: inclined ladder;angle of inclination;opening length;ergonomics shipfitting design
布置,规定:客船的梯道净宽度不小于 900 mm,且
0 引言其倾斜角应不大于 45° ; 货船梯道净宽度不小于
700 mm,且其倾斜角一般应是 45°,但不得大于 50°,
斜梯是船舶各层甲板之间最常用的垂向通道设但在机器处所和狭小处所内应不得大于 60°[1]。
施,人员的往来是靠斜梯实现的。船舶、舰艇总布置《国际航行海船法定检验技术规则》第 2-2 章
设计时,在满足规范要求的前提下,合理地布置斜梯构造—防火、探火与灭火 D 部分第 13 条脱险通道
及其梯口,既能减少通道面积,又能增加工作、生活规定脱险通道的宽度、数量和连续性等应符合《国际
舱室有效使用面积。居住性的通道设计,既要宽畅, 消防安全系统规则》的要求;第 8 篇第 4 章乘客定
又要紧凑;既要有利于工作、战斗,逃生的需求,又要额标准第