文档介绍：基于 HLA 的锻造操作机
系统协同仿真技术研究
范苗苗,范玉顺
(清华大学国家 CIMS 工程研究中心北京 100084)
摘要:本文开展了基于 HLA 的多学科协同仿真技术研究,采用基于协同仿真适配器
的学科模型转换方法,能够将商用软件所建的学科模型转换为符合 HLA 标准的仿真对象模
型(SOM);针对有限元软件 ABAQUS 封装困难的问题,提出了一种引擎封装方法,为开
发 ABAQUS 协同仿真适配器提供了支持,有助于提高模型的可重用性;最后构建了一个锻
造操作机原型系统,实现了锻压加工过程中,机构系统与锻造形变子系统间的多学科协同建
模与仿真,验证了本文所提出的协同仿真技术的有效性和合理性。
关键词:HLA;多学科协同仿真;协同仿真适配器;引擎封装
中图分类号:TP 30 文献标识码:A
on HLA-based Collaborative Simulation Technology for
Forging and Manipulator System
FAN Miao miao1, FAN Yu shun2
National CIMS engineering research center, Tsinghua University, Beijing,
******@., ******@tsinghua.
Abstract: In this paper,research on HLA-based multidisciplinary collaborative simulation
technology is carried out. The HLA adaptor is adopted to realize model transformation so that
models created mercial software patible with HLA. Moreover, in order to
solve the difficulty of wrapping ABAQUS software, an ABAQUS engine encapsulation technique
is proposed, which is helpful for developing HLA adaptor corresponding to ABAQUS software as
well as improving the reusability of models. Finally, a prototype system is developed to
demonstrate the effectiveness of our simulation technology.
Key Word: HLA, multidisciplinary collaborative simulation, HLA adaptor, engine
encapsulation
单位和企业采用了基于软总线的仿真架构,
0 引言这种架构旨在为多学科背景下的仿真提供
一个即插即用的环境,将各种不同学科的仿