文档介绍:ponents of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32 Página 12 de 23
primer surfaces on sill
panel extension
¡ 3 areas
adhesive bead
¡ Bead cross section:
Width = 5 mm
Height = 7 mm (including residue on
sill panel)
adhesive bead
¡ Apply adhesive in two beads of 19
mm x 30 mm and to a height of 7
mm to one surface.
¡ 3 areas
Sill panel extension (Jetta GLI Sport)
Assembly overview
http://ebahn./vw/servlet/Display?action=Next&type=repair&id=... 13/2/2005
ponents of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32 Página 13 de 23
panel extension
¡ Removing 66-8, Sill panel
extension, removing
¡ Installing 66-8, Sill panel
extension, installing
¡ Installation notes 66-8,
Installation notes
¡ Material PUR-RIM
primer surface on sill
panel extension
¡ Qty. 4
¡ 2 Nm
http://ebahn./vw/servlet/Display?action=Next&type=repair&id=... 13/2/2005
ponents of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32 Página 14 de 23
adhesive surface on sill
panel extension
panel
¡ Preparation 66-8, Preparing
bodywork for adhesive
primer surface on sill
panel extension
primer surfaces on sill
panel extension
Sill panel extension, removing
Caution!
When disassembling special
components, a cutting cable must not
http://ebahn./vw/servlet/Display?action=Next&type=repair&id=... 13/2/2005
ponents of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32 Página 15 de 23
be used because of danger of
damaging painted surfaces.
- Clean dirt from all seams so that no
damage to paint will occur when
ponents.
- Cover sidemember with tape at top part
of extended sill panel in order to prevent
damage to paint by cutting cord.
- Remove two bolts - 1 - in front
wheelhousing.
- Cut through three lower adhesive
surfaces of sill panel extension using