文档介绍:Klass.-Nr. 04 81 7 December 2004
Gas-Shielded Arc Welding VW
011 06-2
Rework of Sheet Steel Joints
overn.
g Konzernnorm
Descriptors: sheet steel, welding, gas-shielded arc welding, rework
ssue prior to usage.
Changes
The following changes have been made pared to Volkswagen standard
VW 011 06-2: 1997-01:
─ References to standards updated standard for current i
─ Technical responsibility changed
─ Sentence added to Section
Previous issues
The English translation is believed to be English translation is believed In case of discrepancies the German version shall
1997-01
1 Scope
This standard applies in those cases where welds according to VW 011 06-1 do ply with
the requirements specified in that standard but can be repaired by corresponding rework.
Rework requires the approval of the engineering department.
2 Definitions
The following definitions are used for the application of this standard: Aktualität prüfen / Check Norm vor Anwendung auf
Imperfections in welds:
pores, notches, cracks, lack of fusion and others as well as welds that are too short or one-sided
welds, see DIN EN ISO 5817.
3 Requirements
Imperfections that are impermissible according to VW 011 06-1 as well as missing welds must be
properly repaired.
For ponents requiring rework, a rework guideline shall be establis