文档介绍：FANUC Series 16*/160*/160*s-MODEL B
FANUC Series 18*/180*/180*s-MODEL B
FANUC Series 21*/210*/210*s-MODEL B
OPERATION AND MAINTENANCE
HANDBOOK
B-63527EN/01
• No part of this manual may be reproduced in any form.
• All specifications and designs are subject to change without
notice.
The export of this product is subject to the authorization of the
government of the country from where the product is exported.
In this manual we have tried as much as possible to describe all
the various matters.
However, we cannot describe all the matters which must not be
done, or which cannot be done, because there are so many
possibilities.
Therefore, matters which are not especially described as possible
in this manual should be regarded as ”impossible”.
This manual contains the program names or device names of
panies, some of which are registered trademarks of
respective owners. However, these names are not followed by
or in the main body.
PREFACE
PREFACE
The Operation and Maintenance Handbook is for persons who are familiar
with NC programs and operations. It is used to refer to necessary informa- 1
tion quickly in operating or maintaining NC machine tools at a work site.
The Handbook only contains reference information. It does not contain other
types of information, such as essential information or notes. Read the follow-
ing manuals first. 2
The Handbook assumes that the reader is familiar with the information in the
following manuals.
For safety precautions, be sure to read ”SAFETY PRECAUTIONS,” which
follows the table of contents. 3
Related manuals of Series
16i/18i/21i/160i/180i/210i/160is/180is/210is–MODEL B
Specification
Manual name
number 4
DESCRIPTIONS B–63522EN
CONNECTION MANUAL (HARDWARE) B–63523EN
CONNECTION MANUAL (FUNCTION) B–63523EN–1
Series 16i/18i/160i/180i–TB OPERATOR’S MANUAL B–63524EN 5
Series 16i/160i/160is–MB, Series 18i/180i/180is–MB5, B–63534EN
Series 18i/180i/180is–MB OPERATOR’S MANUAL
Seri