文档介绍：. Technical Note 2001/218
Date of issue: 06/01
Technical Note
Coils on PCB
Michel de Clercq and Tarik Saric
(Hogeschool Eindhoven)
Company Restricted
Koninklijke Philips Electronics . 2001
2001/pany Restricted
Authors’ address data: Currently working outside Philips.
Koninklijke Philips Electronics . 2001
All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner.
ii Koninklijke Philips Electronics . 2001
Company Restricted 2001/218
Technical Note: 2001/218
Title: Coils on PCB
Author(s): Michel de Clercq and Tarik Saric
Part of project: Integration TV-tuner
Customer:
Keywords: ADS, Pstar, PCB coil, coil parameters effects, mesh, implementa-
tion PCB coils.
Abstract: General
In order to increase the integration level of the TV-tuner, it is necessary
to replace the existing air-coil by coils on the Printed Circuit Board (PCB).
The simulations of coils on PCB are done with the Fasterix simulation
tool. Fasterix is developed by the Electronic Design & Tools (ED&T)
Philips department, and makes it possible to simulate the coil behavior.
Possible simulations of the coil parameters such as inductance value and
quality factor, as well as measurements are done.
Problem definition
Is it possible to reach the needed quality factor and inductance value by
using the coils on PCB?
How accurate are the Fasterix simulations with regard to the inductance
value and quality factor?
Tasks
Learn to work with simulation tools and designing coils on PCB in a
simulation tools. Determine the quality factor and inductance value of
different coil shapes on different kind of PCB material. Create a design for
correct measurements, in order to confirm the simulated results with
measurement results.
Making of coils on PCB (for measurements). Measure the designed
coils and give feedback for these designs. Report the taken steps in order
to ma