文档介绍：摘要
本设计为200T液压机液压系统。液压系统主要由主缸运动、顶出缸运动等组成。本文重点介绍了液压系统的设计。
通过具体的参数计算及工况分析,制定总体的控制方案。经方案对比之后,拟定液压控制系统原理图。液压系统选用插装阀集成控制系统,插装阀集成控制系统具有密封性好,通流能力大,压力损失小等特点。
为解决主缸快进时供油不足的问题,主机顶部设置补油油箱进行补油。主缸的速度换接与安全行程限制通过行程开关来控制;为了保证工件的成型质量,液压系统中设置保压回路,通过保压使工件稳定成型;为了防止产生液压冲击,系统中设有泄压回路,确保设备安全稳定的工作;本系统应用的电气控制系统,便于对系统进行控制,可以实现半自动控制,可以实现过载保护,保证系统正常运行。此外,本文对液压站进行了总体布局设计,对重要液压元件进行了结构、外形、工艺设计。
通过液压系统压力损失和温升的验算,本文液压系统的设计可以满足压力机顺序循环的动作要求,能够实现塑性材料的锻压、冲压、冷挤、校直、弯曲等成型加工工艺。
关键词:液压系统;液压机;毕业设计
Abstract
This paper design for the bolster press of hydraulic machines. Mainframe mainly by the motion of master cylinder and the motion of cylinder head out ponents etc. This paper focuses on the hydraulic system design.
Through specific parameters and hydraulic mechanic situation analyzes, formulation of a master control program. By contrast,developed hydraulic control system diagram. Hydraulic systems use cartridge valve integrated control system,integrated cartridge valve control system has good sealing, flow capacity, small pressure loss characteristics etc.
To solve the master cylinder express entered the shortage of oil supply in the top of the mainframe installed oil tank. Master cylinder for the speed of access restrictions and security through the trip exchanging to control switches. To ensure the quality of the work-piece molding, in the hydraulic system installed packing loop through packing work-piece stability molding; To prevent hydraulic shocks, pressure relief system with a loop to ensure that this equipment can be a safe and stable work. This system applicate electricity control system, to facilitate the system of control, we can achieve semi-automatic control and achieve overload protection, ensure normal operation system. In addition, the paper hydraulic station on the overall layout of the ponents of the hydraulic structure、shape、technique for a specific design.
By the loss of hydraulic system pressure and temperature checked. Hydraulic system is designed to meet the hydraulic actio