文档介绍：合肥工业大学
硕士学位论文
基于SolidWorks的剪切机设计与三维造型软件的开发
姓名:史召峰
申请学位级别:硕士
专业:机械制造及自动化
指导教师:朱家诚
2011-03
基于 SolidWorks 的剪切机设计与三维造型软件的开发
摘要
随着生活质量的提高和环保意识的增强,构建和谐社会也成为了我国的指
导思想,资源再利用是现在各个国家研究的一个重要方向。本课题的主要来源于
对废弃电路板再资源化,利用剪切机对印刷线路板进行粉碎。剪切机是机床的
一种,适用于金属回收加工厂、报废汽车拆解场、冶炼铸造行业,对各种形状
的型钢及各种金属材料进行冷态剪断、压制翻边,以及粉末状制品、塑料、玻
璃钢、绝缘材料、橡胶的压制成型。文中主要对各种类型剪切机的工作原理进
行了分析,通过对印刷线路板(PCB)剪切机主要零部件进行参数化计算,设
计出了该剪切机的总体结构。利用 SolidWorks 对其进行了三维模型的建立并进
行了干涉检测,输出了主要零件的工程图。运用专业的分析软件对它进行了力
学分析。运用 VB 对剪切部件进行参数化、模块化的二次开发。对提高剪切机
在今后的结构上有一定的指导作用,对进一步改进设计有重要的参考价值。

关键词:剪切机设计;SolidWorks 建模;二次开发;印刷线路板

I
the design of shears machine and the development
of three-dimensional software based on SolidWorks
Abstract
With the improvement of living standards and the awareness of environmental
protection e more and more important currently, Building a harmonious society has
e the guiding principle in China. Re-use of resource is an important direction of
research now in various countries. This article is mainly from the topic of recycling waste
printed circuit boards, using shears to smash on the printed circuit board. Shearing machine
is a kind of machine which is used for metal recycling plant, scrap car dismantling site and
smelting foundry industry, the various shapes of steel and metal materials for cold cut,
pressed flange,and powder products , plastic, fiberglass, insulation material, rubber
pressing. Shearing machine’s working principle is mainly be analyzed in this text, Design
the structure of the pletely through parameter calculation on the main
components of printed circuit board (PCB) shear. Using the SolidWorks establish its
three-dimensional modeling, conduct interference detection and output the main part of the
engineering drawings. This article use professional analysis software for its mechanical
analysis, VB on the ponents for the parameter and the secondary development of
modular. This article plays a certain guidance role to improve