文档介绍：华三路由器路由命令?状态查看命令–display version–display current-configuration–display interface–display ip route基本操作命令[H3C] interface serial 0/0[H3C-serial0/0] undo shutdown开启或关闭端口?开启已经关闭的端口[H3C] interface serial 0/0[H3C-serial 0/0] shutdown?人工关闭端口tracert:网络连通测试命令?[H3C] tracert traceroute to () 30 hops max,40 bytes packet 1 29 ms 22 ms 21 ms 2 38 ms 24 ms 24 msHDLC协议的配置?在接口上封装HDLC协议–link-protocol hdlc?打开HDLC所有报文调试信息开关–debugging hdlc all [ interface typenumber ]?打开HDLC事件调试信息开关–debugging hdlc event [ interfacetypenumber ] ?打开HDLC数据包调试信息开关–debugging hdlc packet [ interface typenumber ] PPP配置命令?封装PPP–link-protocol ppp?设置验证类型–ppp authentication-mode {pap|chap} ?设置用户名、口令、服务类型–[H3C]local-user huawei–[H3C-luser-huawei]password simple sharepass–[H3C-luser-huawei]service-type pppPAP配置命令?验证方配置–配置验证方式?ppp authentication-mode pap–配置用户列表?[H3C]local-user huawei?[H3C-luser-huawei]password simple sharepass?[H3C-luser-huawei]service-type ppp?被验证方配置–配置PAP用户名?ppp pap local-user username password {simple|cipher} passwordCHAP配置命令?主验证方配置:–配置本地验证对端(方式为CHAP)? ppp authentication-mode chap–配置本地名称? ppp chap user username–将对端用户名和密码加入本地用户列表?[H3C]local-user huawei [H3C-luser-huawei]password simple sharepass [H3C-luser-huawei]service-type ppp?被验证方配置:–配置本地名称密码?[H3C-Serial0/0]ppp chap user username?[H3C-Serial1/1]ppp chap password {simple|cipher} password帧中继的配置?封装帧中继协议–link-protocol frame-relay [MFR |nonstandard | ietf ]?配置帧中继接口的终端类型–fr interface-type{ dce | dte | nni }?选择LMI类型–fr lmi type{ ansi | nonstandard | q933a }配置帧中继地址映射?手工配置静态映射:–fr map { ip | ipx } protocol-address dlci [broadcast ] ?动态建立:使能动态逆向地址解析协议–fr inarp [ ip | ipx ] [dlci ] 帧中继地址映射也就是建立对端协议地址与本地DLCI的映射关系,该地址映射可静态配置,也可动态建立