文档介绍：Catia V5 - Parameters and Formulas Tutorial
Table of Contents
I. Tutorial Overview
A. Disclaimer
B. Software Requirements
C. About Parameters and Formulas
II. The Design Process
A. Pre-defining the Part
B. Part Layout
C. Creating Parameters
D. Assigning Parameters
E. Creating Formulas With User Defined Parameters
III. Getting Help
A. Online Documentation
B. Other
IV. Acknowledgements
1
I. Tutorial Overview
A. Disclaimer
This document is provided as a free resource, to encourage Catia V5 users in the never-
ending quest for new and better skills. It has been provided at the time and expense of
the author, with no pensation. The author has no desire to control the end-
use of the knowledge received from this document; however, use of any portion of this
document mercial training purposes is strictly forbidden. This tutorial is to
remain forever in the realm of free knowledge transfer. Please report any misuse or
violation of this free usage policy.
B. Software Requirements
The intended audience of this tutorial, is Dassault Systemes customers using Catia V5,
Release 14 or higher, with a minimum mended P2 configuration, MD2 license, or
better. The author is using Catia V5 R14 SP09, and HD2 license.
C. About Parameters and Formulas
These topics are beyond basic Part Design. It is assumed that the reader has mastered
basic skills of creating parts in Catia V5. Therefore, no extra attention will be given to
the details of steps leading up to the subject matter. This is necessary for clarity and
brevity.
Having said that, the purpose of creating Parameters and Formulas, is to allow the user a
means to quickly and meaningfully design and edit a part, based on user-defined logic.
But what does that mean? Simply put - you , the reader, have the ability to set up
relationships that make editing the part easier, not only for yourself, but downstream
users! By