文档介绍：Designation: A 102 – 04 Standard Speci?cation for Ferrovanadium 1 This standard is issued under the ?xed designation A 102; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( e) indicates an editorial change since the last revision or reapproval. 1. Scope* This speci?cation covers one grade of ferrovanadium. The values given in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 2. Referenced Documents ASTM Standards: 2 A 1025 Speci?cation for Ferroalloys, General Require- ments E 365 Test Methods for Determination of Vanadium in Ferrovanadium and Vanadium Alloying Additives 3. General Conditions for Delivery Materials furnished to this speci?cation shall conform to the requirements of Speci?cation A 1025, including any supplementary requirements that are indicated in the purchase order. Failure ply with the general requirements of Speci?cation A 1025 constitutes nonconformance with this speci?cation. In case of con?ict between the requirements of this speci?cation and Speci?cation A 1025, this speci?cation shall prevail. Although ferrovanadium is ordered by weight, the customary basis of payment is per pound of contained