文档介绍：Machining
J. Paulo Davim
Editor
Machining
Fundamentals and Recent Advances
123
J. Paulo Davim
Department of Mechanical Engineering
University of Aveiro
Campus Universitário de Santiago
3810-193 Aveiro
Portugal
ISBN 978-1-84800-212-8 e-ISBN 978-1-84800-213-5
DOI -1-84800-213-5
British Library Cataloguing in Publication Data
Machining : fundamentals and recent advances
1. Machining
I. Davim, J. Paulo
'5
ISBN-13: 9781848002128
Library of Congress Control Number: 2008931573
© 2008 Springer-Verlag London Limited
Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted
under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or
transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case
of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing
Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers.
The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a
specific statement, that such names are exempt from the relevant laws and regulations and therefore free for
general use.
The publisher makes no representation, express or implied, with regard to the accuracy of the information
contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that
may be made.
Cover design: eStudio Calamar ., Girona, Spain
Printed on acid-free paper
9 8 7 6 5 4 3 2 1
Preface
Machining is the broad term used to describe the removal of material from a
workpiece and is one of the most important manufacturing processes. Parts manu-
factured by other processes often require further operations before the produ