文档介绍：再来一个按键测试的程序:这个是另外的,与上面的无关;#ifndef _TM1638_H#define _TM1638_H#include <>#define MAND 0X40#define MAND 0x80#define MAND 0XC0//引脚定义sbit DIO=P1^0;sbit CLK=P1^1;sbit STB=P1^2;unsignedcharcodetab[]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F,0x77,0x7C,0x39,0x5E,0x79,0x71,0x40};voidTM1638_Write(unsignedchar DATA) //写数据函数{ unsignedchari; for(i=0;i<8;i++) { CLK=0; if(DATA&0X01) DIO=1; else DIO=0; DATA>>=1; CLK=1; }}unsignedcharTM1638_Read(void) //读数据函数{ unsignedchari; unsignedchartemp=0; DIO=1; //设置为输入 for(i=0;i<8;i++) { temp>>=1; CLK=0; if(DIO) temp|=0x80; CLK=1; } returntemp;}(unsignedcharcmd) //发送命令字{ STB=0; TM1638_Write(cmd); STB=1;}unsignedcharRead_key(void){ unsignedcharc[4],i,key_value=0; STB=0; TM1638_Write(0x42); for(i=0;i<4;i++) c[i]=TM1638_Read(); STB=1; //4个字节数据合成一个字节 for(i=0;i<4;i++) key_value|=c[i]; for(i=0;i<4;i++) if(c[i]==key_value) break; return(i*8+key_value);}voidWrite_DATA(unsignedcharadd,unsignedcharDATA) //指定地址写入数据{ (0x44); STB=0; TM1638_Write(0xc0|add); TM1638_Write(DATA); STB=1;}/*voidWrite_oneLED(unsignedcharnum,unsignedcharflag) //单独控制一个LED函数,num为需要控制的led序号,flag为0时熄灭,不为0时点亮{ if(flag) Write_DATA(2*num+1,1); else Write_DATA(2*num+1,0);} voidWrite_allLED(unsignedcharLED_flag) //控制全部LED函数,LED_flag表示各个LED状态{ unsignedchari; for(i=0;i<8;i++) { if(LED_flag&(1<<i)) Write_DATA(2*i+1,3); else Write_DATA(2*i+1,0); }} */voidinit_TM1638(void){ unsignedchari;