IE之路――路由策略.doc

文档介绍：实验路由策略一实验拓扑图1实验一实验要求:原本网络使用EIGRP现在要求用OSPF来发现网络拓扑。实验分析:要是网络平滑过渡可先将OSPF配置好,然后理由改变EIGRP的管理距离使OSPF替换EIGRP进路由表,等到全网为OSPF后,:首先全网为EIGRP如下r1#,,Serial0/,[90/],00:01:48,Serial0/,3/[90/],00:00:13,Serial0/0r2#,,Serial0/,,Serial0/[90/],00:02:56,Serial0/[90/],00:01:16,Serial0/2r3#,[90/],00:01:21,Serial0/,,Serial0/[90/],00:01:21,Serial0/,3/0现在在每个路由器都配置OSPF能发现都建立邻居,但没进路由表r1#/-00:00:#/-00:00:./-00:00:#/-00:00:#,,Serial0/,[90/],00:01:48,Serial0/,3/[90/],00:00:13,Serial0/0r2#,,Serial0/,,Serial0/[90/],00:02:56,Serial0/[90/],00:01:16,Serial0/2r3#,[90/],00:01:21,Serial0/,,Serial0/[90/],00:01:21,Serial0/,3/0主要原因是OSPF管理距离比EI