文档介绍：南京理工大学硕士学位论文引信虚拟样机协同仿真技术研究姓名:李太梅申请学位级别:硕士专业:机械电子工程指导教师:王炅 20060627 {羊桃拂埘茁真投术研究摘要现有的gf信虚拟样机系统多集成在CAD平台上进行开发,提供以设计为主的支撑乎套嚣境,零文避一多扩袋研究了CAE平台土的引痿虚拟撵枫仿囊支撑平蠹,对引倍乃至武器系统的研发疑脊实际正程应用价值。本文研究的主要内容为:(1)东卡蠢麓|'丑l宽戒熬弓{偿寝誉棒爨设诗支撑平台基础上,野发7弓{偿虚拟样规仿真支撑乎台,实现了对设计支撵平台垒成模燮的管瑗。设计平台和傍粪平台舆青一定褶对猛藏蛙,实理了鼹平台之婀豹数***凌姆共享。(2)仿真变撑乎鑫是在ANSYS Workbench 软件基硪上进行的糟户仡并发,本文介绍了ANsYS Workbench的鞲标、意义及特点, 对嬲户化定铡进行了重点研究。(3)对引信虚拟样机仿真支撑平螽的协同仿真功熊避释了研究。仿真变撵平台实现了鸯箕谴骈究天贯酌共享,远程分稚式求麓环境静醚髯使仿真求瓣过载协同进行,用户珂发的缎件实现了共享。(4)对日l信零件仿真分祈避程静客户纯歼麓技术遴行研究,建立了专门酶弓}詹零释仿真支擦平台势舞发了萼l 铸常用零部传的仿舆过程。当零件仿真支撵平台的歼发扩大到部件时,形成≈l信零郝侮家族程序,扩大弱{亍避对,便形成雩l信器鼗专雳分褫程露,雩|蘩零律德囊寰撵乎裔为以后的搿发奠定丁基础。关键词:引信虚拟样机,仿真支撑平台,ANSYsWorkbench客户化歼发,协问仿巍鸯焱理丁大学碗}论支曩嚣辩搬样机协辫髂真技术甜f究 Abstract Theexisting融葚e virtualprototyping system、which isbuilt onthebasisofCAD,is infact akind dissertationexpands theresearchandstudies the simulationsupport platform based onCAE。It’ssignificant forfuzedevelopment. The dissertationmainly includes: 0)On thebasis ofthedesign support platform of thevirtualprototyping system forfuze, thesimulationsupportplatform isdeveloped and twoplatforms黼 relativelyindependent,and the datum callbetransmittedandshared between the two platforms. G》The simulationsupportplatform isaetuaUy acustomized platform based onANSYS theadvantages andtheaimofANSYS Wo呔bench arediscussed,and the customizationtechnologies粼especially emphasized. (3)The collaborativesimulationfunctionsof thesimulationplatform are alsostudied in datashould municated and sharedbetween thedesign support platform andthesimulationsupport thispurpose,the shareofsimulation supportplatform-is realized,theconfiguration ofthe remote distributedsolutionmanager is set,which aims tomake theprogress ofacquiring solutionresultsperformcollabomtively with other machines,and munion ofBsers’applications with otherresearchersis alSO蠢scussed. (4)The same kindof Rtzeparts sharesthe same loadstype andthe dif