1 / 79
文档名称:

小型太阳能吸收式空调发生器与增压器研究.pdf

格式:pdf   页数:79
下载后只包含 1 个 PDF 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

小型太阳能吸收式空调发生器与增压器研究.pdf

上传人:1006108867 2014/5/29 文件大小:0 KB

下载得到文件列表

小型太阳能吸收式空调发生器与增压器研究.pdf

文档介绍

文档介绍:华中科技大学
硕士学位论文
小型太阳能吸收式空调发生器与增压器的研究
姓名:刘付伟
申请学位级别:硕士
专业:制冷及低温工程
指导教师:何国庚
20090524
华中科技大学硕士学位论文
摘要
太阳能作为一种取之不尽用之不竭的洁净能源,受到了世界范围内越来越多的关
注与研究。在空调领域,由太阳能驱动的溴化锂吸收式制冷与传统的制冷剂压缩
时制冷相比,因其对臭氧层没有破坏作用和不会产生温室效应气体,得到了更快
的发展。随着家用空调的普及,溴化锂空调也在朝着小型化发展。
在吸收式空调中,发生器的发生效果如何直接影响到系统的运行效果。由于
设备规模和溶液流动状态的限制,小型发生器的换热效果不够理想。现在各种强
化换热管的制造使用技术越来越成熟,其换热效果更是光管所无法比拟的。所以
对于沉浸式发生器选择了光管、T 形管和表面多孔管进行研究,通过研究可以看
出多孔管的优越性;与此同时,研究了小型喷淋式多孔管发生器的换热特性和运
行情况, 并与沉浸式进行了比较,讨论了两者的优劣,推荐沉浸式多孔管发生
器为小型太阳能吸收式空调的发生器形式。
对于太阳能单效吸收式制冷循环,由于受热源温度的限制,系统的制冷量和制冷
效率都比较较低,所以采用增压循环来改进系统效率,即在发生器和增压器之间加一
增压器,提升发生器出口蒸汽的压力。由于泵腔要求清洁,无其他任何气体或者气体
杂质,因此选择罗茨泵做增压器,研究了小型圆弧线二叶转子的罗茨增压泵,并对其
泵腔内的流体进行了模拟,得出了在实际工作状况下,泵腔内的压力分布和速度分布
情况,为改进转子型线提供一定的依据。

关键词:吸收式制冷发生器强化传热罗茨泵模拟
I
华中科技大学硕士学位论文
Abstract
Solar energy as a clean and inexhaustible energy has attracted more and more
attention in the world. In the air-conditioning areas, compared with traditional
compression refrigeration, Solar-driven lithium bromide absorption refrigeration system
develops fast, because it does not damage the ozone layer and does not produce
greenhouse gases. With the popularization of domestic air-conditioning, lithium bromide
air-conditioning plant develops towards miniaturization.
In the absorption air conditioning system, the occurrence of generator directly impact
on the operation of the system. The heat transfer of small generators is not good because
of the restrictions of the equipment size and flow state. Thus we choose plain tube,shape
T fin tub and porous surface tube to use in the submerged generator. By the research, we
can see the superiority of porous surface tube. At the same time, studied on the heat
transfer characteristics and operating conditions on porous surface tube in ray-type
generator, pared with submerged generator, finally choose the submerged
generator with porous surface tube for improving heat transfer inside the generator and
reducing the size of the equipment.
In t