文档介绍：华为交换机的基本配置 1 一、交换机的软件版本由于华为交换机的软件版本不尽相同, 我们以比较新的版本 为例。?[New_S3552]display version ? Huawei Versatile Routing Platform Software ? VRP (R) Software, Version , RELEASE 0007 ? Copyright (c) 2000-2004 HUAWEI TECH CO., LTD. ? Quidway S3552G uptime is 41 weeks,0 day,9 hours,32 minutes 2二、端口操作?1、打开\关闭以太网端口? shutdown ? undo shutdown ?例如: ?[YD_S3552]interface eth 0/38 ?[YD_S3552-0/38]shutdown ?[YD_S3552-0/38]undo shutdown 3二、端口操作?2、端口描述? description text ?例如: ?[YD_S3552]interface eth 0/38 ?[YD_S3552-0/38]desc ?[YD_S3552-0/38]description shihuanbaoju. ?[YD_S3552-0/38]undo desc 4二、端口操作?3、端口双工状态、端口速率? duplex { auto | full | half } ? undo duplex ? speed { 10 | 100 | auto } ? undo speed 5二、端口操作?4、端口链路类型?设置端口为 Access 端口 port link-type access ?设置端口为 Hybrid 端口 port link-type hybrid ?设置端口为 Trunk 端口 port link-type trunk ?恢复端口的链路类型为缺省的 Access 端口? undo port link-type 6二、端口操作?5、把当前以太网端口加入到指定 Vlan 把当前 Access 端口加入到指定 VLAN ? port access vlan vlan_id ?将当前 Hybrid 端口加入到指定 VLAN ? port hybrid vlan vlan_id_list { tagged | untagged } ?把当前 Trunk 端口加入到指定 VLAN ? port trunk permit vlan { vlan_id_list | all } ?把当前 Access 端口从指定 VLAN 删除? undo port access vlan ?把当前 Hybrid 端口从指定 VLAN 中删除? undo port hybrid vlan vlan_id_list ?把当前 Trunk 端口从指定 VLAN 中删除? undo port trunk permit vlan { vlan_id_list | all }? 7二、端口操作?6、设置以太网端口缺省 Vlan ID ?设置 Hybrid 端口的缺省 VLAN ID ? port hybrid pvid vlan vlan_id ?设置 Trunk 端口的缺省 VLAN ID ? port trunk pvid vlan vlan_id ?恢复 Hybrid 端口的缺省 VLAN ID 为缺省值? undo port hybrid pvid ?恢复 Trunk 端口的缺省 VLAN ID 为缺省值? undo port trunk pvid 8二、端口操作?7、查看端口状态 display interface ?例如: display interface 0/11 ? 0/11 current state : UP ? IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0- fc37-a4f0 ? Description: to_qixiangju ? The Maximum Transmit Unit is 1500 ? Media type is twisted pair, loopback not set ? Port hardware type is 100_BASE_TX ? 10Mbps-speed mode, half-duplex mode ? Link speed type is force link, link duplex type is autonegotiation ? Fl