文档介绍：STD-SAE -ENGL 177b 7943725 1584bb9 220 STAN DARD ANSI bml996 Addendum to ANSI -I 970 (including ANSI a-1 976) Approved by the American National Standards Institute Involute Splines Published by: Society of Automotive Engineers, Inc. 400 Commonwealth Drive Warrendale, PA 15096-O001 . Phone: (412) 776-4841 Fax: (412) 776-5760 STD-SAE B92-L-ENGL L77b = 7943725 0584b70 TLi2 STANDARD ANSI b-I 996 Addendum to ANSI -1970 (including ANSI a-1 976) Approved by the American National Standards Institute Involute Splines Published by: Society of Automotive Engineers, Inc. 400 Commonwealth Drive Warrendale, PA 15096-0001 . Phone: (41 2) 776-4841 Fax: (41 2) 776-5760 An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review and users are cautioned to obtain the latest editions. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. SAE TECHNICAL BOARD RULES AND REG