文档介绍：ENGINEERING MATERIAL SPECIFICATION工程物料说明书
ELECTROPLATING, BRIGHT OR LOW GLOSS 电镀，亮色或亚光 WSS-M1P83-C1
DECORATIVE FINISH OVER ABS, PC/ABS OR 用ABS丙烯睛-丁二烯-苯乙烯,PC聚碳酸酯/ABS饰面或 FILLED NYLON - INTERIOR用尼龙填充-内饰件
ELECTROPLATING, BRIGHT OR LOW GLOSS电镀，亮色或亚光 WSS-M1P83-C2
DECORATIVE FINISH OVER ABS, PC/ABS, OR用ABS,PC/ABS饰面或 FILLED NYLON -EXTERIOR用尼龙填充-外饰件
SCOPE 范围
These specifications define the performance requirements for finished coatings of mechanically or chemically deposited electrical conductor coat and electrodeposited copper, nickel, and chromium for the decoration and protection of acrylonitrile butadiene styrene (ABS), polycarbonate/acrylonitrile butadiene styrene (PC/ABS) or filled nylon (PA) 面和用电镀铜，镰，和珞来装饰和保护ABS, (PC/ABS)或尼龙填充饰件成品表面的执行要求。
APPLICATION 应用
These specifications were released originally where a bright or low gloss decorative and/or protective finish is required for interior or exterior parts. Unless otherwise specified on the engineering drawing, all parts shall be fin ished with a final coati ng of chromium. Two levels of performance are defi ned as follows:此说明书最初是为了需要装饰或保护亮色或亚光的内饰件或外饰件而发行的。除非工程图中有 专门说明，所有部件必须镀辂。参考以下两个执行标准：
WSB-M1P83-C1 Interior part applications 内饰件应用
WSB-M1P83-C2 Exterior part applications 外饰件应用
For coating over chrome applications, refer to WSB-M2PXX-XX for interior applications and WSB-M2PXX-XX for exterior