文档介绍：
: .
产品风险评估报告一览表
D
香港泰成玩具有限公司
Product Risk Assessment Form
产品风险评估一览表
香港泰成玩具有限公司
Product Risk Assessment Form
产品风险评估一览表
香港泰成玩具有限公司
Product Risk Assessment Form
产品风险评估一览表
香港泰成玩具有限公司
Product Risk Assessment Form
产品风险评估一览表
13
Circular Hole (圆孔) (Finger Trap Hazard)
Accessible circular hole in any rigid material less than mm in thickness should be either < 6 mm or > 13 mm in diameter if depth > 10 mm.（，直径需<6mm或13mm，深度需>10mm）
14
Jaw Entrapment (颌骨危险) (18M-)
Scope: Activity tables, Large bulky toy, Stationary floor toy, Push toy, Ride-on toy. （范围：活动桌椅，大型笨重玩具，可固定站立玩具，推动玩具，骑乘玩具。Openings in handles and steering wheels that allow passage of a 19 X 19 mm block of any depth greater than 13 mm must also allow passage of a 38 X mm block of any depth greater than 13 ，高大于13mm的方块，还应可通过一个长为38mm
15
Projectile (弹射玩具)
Tip radius > 2 mm. Soft impact surface（子弹半径>）
Design should not able to discharge missiles other than those provided with the toy.（射弹玩具需配有专用子弹，不可换用其他子弹）
16
Durability (坚固) (Mechanical Hazards)
No Small Parts, Sharp Edges or Sharp Points after below abuse tests (3Y-).（滥用测试后无尖点、利边、小物件。）
Drop Test Tension Test Torque Test Impact Test Compression T