文档介绍：REFERENCe MANUAL
OVATOR S-800, S-600 and S-400 LOUDSPEAKERS
ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, Español,
Nederlands, 中文 , РУССКИЙ, 한국어
OVATOR S-800, S-600 & S-400 – English
Introduction and Unpacking
The Ovator S-800, S-600 and S-400 are very high performance speakers that will
repay effort spent on installation. It is important that you read this manual before
fully unpacking and installing your Ovators. The manual begins with unpacking
instructions. Ovators are extremely heavy and to minimise the risk of damage
or personal injury you should follow these instructions carefully. Unpacking and
installing Ovators is a two-person task and should not be attempted alone.
1 S-800 Unpacking The speaker has front and back castor trolleys
attached to its plinth that enable it to be rolled out of
It is important that Ovators are unpacked as described in the carton and down the ramp. The speaker is extremely
the following paragraphs and illustrations. heavy – take great care. Do not work alone.
They should be unpacked in the room in which they are to Work with a another person to roll the speaker to its
be used and close to their likely installed positions. likely installed position. Push the speaker from a point
Having removed this manual proceed to unpack each towards the middle or below. Remove the castor trolleys
Ovator following the steps below: one at a time. Unscrew both attachment screws then tilt
the speaker backwards, using your foot to stabilise it, and
With the carton standing upright, open the two front rem