文档介绍：Redback SE800 设备操作手册 日常检测主要是对设备的工作环境、硬件工作状态、软件工作情况、设备当前工作性能等进行检测,确保及时发现问题消除事故隐患。一、硬件 1. 设备工作环境对设备工作环境的温度、湿度进行、供电、设备通风等进行检查确认环境不影响设备的运行及设备安全。 800 Status LEDs ( SE800 机框状态指示灯) Label 名称 Activity 有效状态 Color 颜色 Description 描述 PWR A On 亮 Green 绿 The A-side .48 VDC power source is present A路 48 伏交流电电源通电正常; Off 灭 None 无 The A-side .48 VDC power source is absent A路 48 伏交流电电源没有通电 PWR B On 亮 Green 绿 The B-side .48 VDC power source is present B路 48 伏交流电电源通电正常; Off 灭 None 无 The B-side .48 VDC power source is absent B路 48 伏交流电电源没有通电 FAN 风扇 On 亮 Red 红 A failure condition exists on the fan and alarm unit. 告警单元或者风扇存在故障信息; 800 Alarm LEDs (机框告警指示灯): Label 名称 Activity 有效状态 Color 颜色 Description 描述 ACO On 亮 Yellow 黄 An audible alarm condition exists but the audible alarm has been silenced. 一个声音告警,但是该告警已经被静音; Off 灭 None 无 There is no audible alarm condition or the audible alarm has not been silenced. 没有声音告警,或者声音告警没有被静音; CRITICAL On 亮 Red 红 One or more critical alarms exist on the chassis. 机框存在一个或多个严重告警; Off 灭 None 无 No critical alarm exists on the chassis. 机框没有严重告警; MAJOR On 亮 Red 红 One or more major alarms exist on the chassis. 机框存在一个或多个主要告警; Off 灭 None 无 No major alarm exists on the chassis. 机框没有主要告警; MINOR On 亮 Red 红 One or more mino alarms exist on the chassis. 机框存在一个或多个次要告警; Off 灭 None 无 No minor alarm exists on the chassis. 机框没有次要告警; LEDs on Controller Cards (控制卡设备指示灯) Label 名称 Activity 有效状态 Color 颜色 Description 描述 FAIL On 亮 Red 红 A failure exists on the controller 控制卡存在一个故障; Off 灭 None No failure exists on the controller card. 控制卡没有故障; ACTIVE On 亮 Green 绿 This controller card is active and is providing or capable of providing service. 控制卡处于主用状态,功能可用 Off 灭 None This controller card is either on standby (the STDBY LED is lit) or has failed (the FAIL LED is lit). 控制卡工作在备用状态或者卡有故障( FAIL 灯亮); STDBY On 亮 Yellow 黄 his controller card is the standby controller for the system. 控制卡处于备用状态; Off 灭 None This controller card is either the active cont