文档介绍：SOUTH AFRICAN NATIONAL STANDARD 南非国家标准 Identification colour marking 颜色识别标记 Part 2: Identification of hazards and equipment in work situations 第二部分:工作环境中的危险和设备识别 SANS 10140-2:2008 Edition 版本 Table of changes 更改表 Change No. 更改编号 Date 日期 Scope 范围 Amdt 1 1982 Amended to change the subclause dealing in the use of cornflower blue. 修订更改规定使用浅蓝色的子条款 Amdt 2 1994 Amended to include an additional colour and to clarify the use of the colour cornflower blue. 包括额外一种颜色,澄清浅蓝色运用的修订 Amdt 3 2008 Amended to change the designation of SABS standards to SANS standards, to move reference to legislation to the foreword and to update a referenced standard. 把 SABS 标准名称更改为 SANS 标准, 把法律参考移入序言中,并更新参考标准 Acknowledgement 致谢 Standards South Africa wishes to acknowledge the valuable assistance derived from publications of the anizations: 南非标准得到以下机构的帮助,在此表示谢意: British Standards Institution 英国标准协会 anization for Standardization 国际标准组织 Foreword 序言 This South African standard was approved by mittee StanSA TC , Industrial safety colours , in accordance with procedures of Standards South Africa, pliance with annex 3 of the WTO/TBT agreement. 该南非标准经过国家委员会 StanSA TC , Industrial safety colours 工业安全色的批准,符合南非标准程序,与 WTO/TBT 协议的附录 3 一致。 This document was published in April 2008. This document supersedes SABS 0140-2:1978 (first revision). 该文件于 2008 年4 月份出版。代替 SABS 0140-2:1978 (第一修订版)。 A vertical line in the margin shows where the text has been technically modified by amendment Nos 2 and 3. 页边空白的垂线部分说明已经被修正部分 2和3 更改的部分。 A reference is made in (a) to“ national legislation ”. In South Africa this means the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993). Amdt 3 (a) 中参考“国家法律”。在南非,这指的是职业健康安全法案 1993 (法案号 85,1993 ) A reference is made in (b) to“ national legislation ”. In South Africa this means the Mines and Works Act, 1956 (Act No. 27 of 1956). Amdt 3 (b) 参考“国家法律”。在南非指的是矿山工程法案, 1956 (法案号 27,1956 )。 Preface 序言 There isa need (caused by the growth of work forces that lack mon l