文档介绍:KP-200 Plus
Stand-alone Keyboard Display Unit
USER'S MANUAL
Contents
OUTLINE OF THE KP-200 PLUS 3
KP-200 PLUS Fble of the KP-200 Plus to the RS-232 port of the printer
Turn on the printer power.
Operation
When turn on the printer power, the messages display on the LCD screen is as following:
CHECKING PRINTERS
WAITING......
KP-200 Plus
KP-200 Plus performs self diagnosis and displays the message as follows:
“FORM” = SELECT LABELS
Press the |FORM| key to select label form.
XXXXXXXX (File name) T J TO MOVE LIST
Note:
If no file is downloaded into printer memory, LCD will display as below, please to download the file to printer first.
NO LABEL EXISTING!
PRESS EXIT
Press 用 叫 arrow keys to list stored label forms. Or press 回 key to input the file name.
INPUT THE FILE NAME:
Then, press |ENTER| key to execute the selected label form.
Follow the prompts which are shown on the LCD screen to print the labels.
Note:
Label forms stored on the printer should be in the () filename formats. If input the wrong file name, the LCD will show as below, please must input the exact file name.
FORMAT NOT FOUND OR
NO PROMPT RESPONSE.
Function Keys for KP-200 Plus
There are 68 keys on KP-200 Plus. Most of the keys are the same as normal keyboard of desktop computer. The followings are the descriptions of the special function keys:
FORM| key
List the label forms downloaded in the printer memory
CLEAR) key
Clear characters of the line on the LCD screen where cursor locates.
顽key
Hold down "ALT” and press the 0~9 keys to get special characters.
|FT| key
Search the file and enter the setup menu. (Please refer section 5 & section 7)
gkey
The one function key is reserved.
Power-On Utilities
There are six power-on utilities to set up and test the keyboard. These utilities are activated by pressing the [Fl] key and turning on the printer power simultaneously. The utilities are listed below:
Self test (This function is used for facto