文档介绍：毕业论文(设计) 智能回转支承现场监控软件的开发院系: 机械与动力工程学院姓名:学号:专业: 机械工程及自动化摘要目前,国内大中小型企业为提高产量和生产效率,增强企业运行安全系数, 普遍开始利用计算机进行工业自动化生产的技术改造。通过微机对现场的生产情况进行监视控制,可以达到减轻工作量,提高劳动生产率和安全可靠性的目的, 这已经成为企业界管理人员和自动化领域技术人员的共识?? 1。. 现在为方便地开发适用的工业监控软件,国内外诸多公司已经开始研发工业组态软件,诸如美国的 Intouch ,台湾研华的 Genie ,北京恒力的 Good -Helper 。这些组态软件缩短了工业监控系统软件的开发周期,也相应提高了其可靠性。然而,这些组态软件本身价格昂贵,对于小型企业的单机系统来说,又有许多功能用不上,造成浪费。同时组态软件的本身也还存在不足之处,不能满足一些特殊要求?? 2。因此, 目前仍然需要技术人员掌握基本的开发方法,量体裁衣地为企业开发出小型经济适用的软件。随着 Windows 系统的普遍使用,许多计算机控制系统上位机普遍采用 Windows 编程。而面向 Microsoft Windows 系统的语言程序为用户设计一个优美的图像界面提供了方便,为控制系统建立高度友好的用户界面奠定了基础。 Visual C++(VC) 是Windows 编程的强有力的开发工具,提供了现成的窗口、控制与工具条的制作手段,大大简化了界面的开发过程,并且开发出的界面具有组态软件风格,使用起来方便、灵活、简单易学?? 3。关键字:监控软件组态软件 VC++ Abstract At present, in order to improve yield and production efficiency, and enhance the safety factor of running pany, the domestic small and medium-sized enterprises began to carry out technological transformation of industrial automation production by puter technologies. Monitoring and control of the production on the site by puters, it has reduced workload, and has improved labor productivity and safety reliability, and it has e a consensus between management personnel . of enterprises and the automation technical staff. Nowadays, to develop the appropriate industrial monitoring software, many domestic and panies have started to develop industrial configuration software, such as Intouch in the United States, Genie of Advantech in Taiwan, Good-Helper of HengLi in Beijing. The configuration software has shortened the development cycle of industrial monitoring system software, and improved its reliability correspondingly. However, the configuration software, for stand-alone system of small enterprises, is expensive, and has many useless functions, which caused waste. At the same time, the configuration software itself has drawbacks, and sometimes it can ’t meet some special requirements. Therefore, presently some enterprises still need the technical staff to develop small economic applicable softw