文档介绍：Rolf Kindmann, Matthias Kraus
Steel Structures
Design using FEM
Rolf Kindmann/Matthias Kraus
Steel Structures
Design using FEM
4
Prof. Dr.-Ing. Rolf Kindmann Dr.-Ing. Matthias Kraus
Ruhr-Universität Bochum Ingenieursozietät SKP
Lehrstuhl für Stahl-, Holz- und Leichtbau Prinz-Friedrich-Karl-Str. 36
Universitätsstraße 150 44135 Dortmund
44801 Bochum
Language Polishing by Paul Beverley, London
Cover: SIGNAL IDUNA PARK, Dortmund, Professor Rolf Kindmann
Library of Congress Card No.:
applied for
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library.
Bibliographic information published by the Deutsche Nationalbibliothek
The Deutsche Nationalbibliothek lists this publication in the Deutsche Nationalbibliografie; detailed bibliographic data are available on
the at <->.
2011 Wilhelm Ernst & Sohn, Verlag für Architektur und technische Wissenschaften GmbH & Co. KG,
Rotherstraße 21, 10245 Berlin, Germany
All rights reserved (including those of translation into other languages). No part of this book may be reproduced in any form – by
photoprint, microfilm, or any other means – nor transmitted or translated into a machine language without written permission from the
publishers. Registered names, trademarks, etc. used in this book, even when not specifically marked as such, are not to be considered
unprotected by law.
Coverdesign: Sophie Bleifuß, Berlin
Herstellung: pp030 – Produktionsbüro Heike Praetor, Berlin
Printing and Binding: Betz-Druck GmbH, Darmstadt
Printed in the Federal Republic of Germany.
Printed on acid-free paper.
ISBN 978-3-433-02978-7
Electronic version available. O-book ISBN 978-3-433-60077-1
Preface
Steel structures are usually beam or plate structures consisting of thin-walled cross
sections. For their design, deformations, internal forces and moments as well as
stresses are needed, and the stability of the structures is of great import