文档介绍：Q/SJV
慎江阀门
HG/-2013-SNG
A版 A Revision
受控
Under control
核电阀门
非核级阀门试验规程
Hydrostatic Test Specification of
Non-safety Valves
慎江阀门有限公司发布
Released By Shenjiang Valve CO., ltd
前言
FOREWORD
本规程由慎江阀门有限公司提出
This specification is proposed by Shenjiang Valve Co., Ltd.
本规程由慎江阀门有限公司技术部负责起草
This specification is drafted by the technology Dept of Shenjiang Valve Co., Ltd.
本规程主要起草人:孟庆联
Main drafter:
本规程审核人: 董杰
Reviewed by:
本规程批准人: 殷连波
Approved by:
修改记录
RECORD OF REVISIONS
版本号
Revision
修改内容
Changes
修改人
Author
审核人
Verified By
A
初版 Original Issue
Q/SJV
慎江阀门
核电阀门
非核级阀门试验规程
Hydrostatic Test Specification of Non-safety Valves
HG/-2013-SNG
A版 A Revision
共7页第1页
Page 1 of 7
1 主题内容与适用范围The content and application scope
本规程规定了按CAP1400规范设计的PV33、PV40、PV41等非核级阀门压力试验(如壳体水压试验,填料、阀座密封试验等)的要求。
本规程适用于按CAP1400规范设计的非核级闸阀、球阀、旋塞阀、蝶阀、止回阀、截止阀等,其他类型的阀门也可参照使用。
This specification identifies the hydraulic shell test, packing seal, valve seat seal tests etc. requirements for CAP1400 design non- safety related PV33、PV40、PV41 valves.
This specification is applicable to the CAP1400 design non- safety related gate valve, ball valve, plug valve, butterfly valve, check valve, globe valve and so on; other types of valves can also reference this specification.
2 引用标准及规范Reference standards and norms
SNG-PV33-Z0-001 大于等于3”的手动闸阀、截止阀、止回阀,ASME
3” and larger manually operated gate,globe and check valves,ASME
SNG -PV40-Z0-001 球阀和旋塞阀,ASME
Ball and plug Valves, ASME
SNG -PV41-Z0-001 蝶阀,ASME
Butterfly Valves, ASME
ASME -1981 法兰、螺纹和焊接连接阀门
Flanged, threaded and welded connection valve
ASME BPVC-Ⅲ-2001 核动力装置设备建造准则
Rules for the construction of nuclear ponents
MSS SP-61-1985 钢制阀门压力测试 Pressure test of steel valves
MSS SP-68-1997 高压偏心结构蝶阀
High-pressure eccentric structure butterfly valve
SNG -GW-Z0-602 CAP1400使用在核电蒸汽和相关系统的设备清洗和清洁度要求
CAP1400 cleaning and cleanlines