文档介绍：脚踏式大便冲洗阀安装使用说明书
Installation and Application Manual:
Pedal Flush Valve
为了充分发挥产品功能,请按照本使用说明书内容正确安装
Please follow the installation instructions correctly to ensure the full efficiency of this product
用途与特点
Usage and Features
广泛适用与宾馆、饭店、家庭、医院及公共场所的便池冲洗,实用美观。
Universally applied for toilet water flush in hotels, restaurants, homes, hospitals and public facilities, aesthetic and practical.
卫生:以脚代手,减少了公共场所的疾病的传播,另外能防止水源污染。
Hygienic: pedal control reduces public disease spreading and water contamination by avoiding hand contacts.
安装示意图(1)
Installation Figure (1)
I 大样- Bulk sample, 钻孔– Drill hole, 铜排水管– Brass drain pipe
铜信号管– Brass signal pipe,脚踏控制器– pedal controller
安装示意图(2)
Installation Figure (2)
请注意:在安装时,信号管不能折成死角
Note: signal pipe MUST NOT be bent to right-angle.
排水管– Drain pipe
信号管– Signal pipe
主要性能与参数
Main Funtions and Parameters
供水压力:-.
Water Pressure: -.
冲洗时间s:3-10s.
2. Flush Time s: 3-10s.
3. 冲洗水量L: 6-8L
3. LPF: 6-8L
4. 供水温度:0-50 °C.
4. Water Temperature: 0-50 °C.
安装方法
Installation
供水管道的清洗安装之前,务必清理管中杂物,砂砾等异物,以免造成堵塞。
Flush the water supply pipes thoroughly to remove miscellaneous articles and debris to avoid pipe jam.
控制器的安装 Controller Installation 排水管 Drain pipe
信号管 Signal pipe
在安装本装置组件之前,首先把预埋坑内的泥沙等杂物清理干净以便安装,如安装图所示,首先把控制座2与信号管6,排水管7接通,拧紧接头螺母1,在控制座2和踏块4加上密封垫3,再把踏板5盖上,拧上螺钉。注:图1信号管与图2信号管5是同一条管。
Before installation, c