文档介绍：ViaAqua UTC Modular Canister Filter
Standard and UV Model
Parts list:
Valve and tap connectors
Pump lid
Units with UV-C replace part #3
UV-C PL light bulb
Quartz Sleeve and reaction chamber
Priming plunger
Pump lid O ring
Impeller
Impeller well cover
Pump lid intake tube only on units without UV
gasket
media container
white filter pad
coarse black sponge
discharge tube/media container
latches
Canister
intake prime/U tube
Priming cap
surface skimmer
intake tube
intake strainer
Output prime/U tube
Output coupler
Output elbows
Spray bar
Suction cups
Spray bar cap
Tubing
Important:
Do not deviate from the Safeguards and safety
Before installation of a ViaAqua™ Canister filter, read and follow these important safeguards and safety guidelines.
Do not operate ViaAqua® canister filter without water. Doing so can cause permanent damage to the canister filter.
Carefully check the canister filter after installation to ensure that the canister filter and the tubing connecting the canister to the aquarium are not wet.
Prior to maintenance on any electrical aquarium appliance or maintenance to the aquarium, you must disconnect all electrical aquarium devices.
Only use the canister filter for it intended use.
Do not plug into an extension cord. Plug only directly to a GFCI outlet
Verify that tubes and the canister filter are not in con