文档介绍：理光复印机维修经典(Ricoh copier maintenance classic)
One: how to get into SP mode
According to the following order surface press key C - 1 - 0 - 7 - C, keep the press C/ button for 3 seconds or more after the;
The SP mode menu is displayed on LCD, 1 COPY 2 FAX 3 PRINTER
Select the mode number as you need.
Two: how to quit SP mode
Press C or CANCEL key once or more than two times to return to standby mode display
Three: from SP mode to copy mode
Press the COPY key, select the appropriate copy mode, and try the copy; to return to SP mode, press the C key.
Four: how to choose the program number
Use the number keys to input the first level program number (or the right or left of the cursor keys to change the number, and the OK button) or #
With a digital key input second level program number (or the right or left of the cursor keys to change the number, and the OK button) or #
Select the third level program number if you have: select the second level, and then use the right or left cursor keys.
To return to the next higher level, press C.
Five: enter a value or set value for the SP mode
First of all, enter the desired program number;
Use the number keys, enter the desired set value, before entering the required set value, if necessary, use - / * key in the "+" and "-" transformation, and then press R/# button or OK keyboard.
Six: commonly used SP mode code
SP monly used 1015/1018 Ricoh copier
After the iron powder is replaced, the TD sensor initializes the SP mode code: SP2-214;
The new machine starts with SP7-825 to initialize the electrical master counter;
How to clear the PM count: enter SP7-804, at the same time according to the original type key and OK or R/# key to reset the counter, the ess shows the pleted";
To test, making black printing products, the use of SP5-902;
How to solve the problem that the copy of hand feeding paper is plete?
The first pick to send boxes, then click "#" button, then there will be a box size, choose the A4 size, a copie