文档介绍：Aruba3400无线控制器配置手册
初始化配置
无线控制器初始化配置
Enter System name [Aruba3400]:
Enter VLAN 1 interface IP address []:
Enter VLAN 1 interface mask []:
Enter IP Default gateway [none]:
Enter Switch Role, (master|local) [master]: ————————————控制器角色
Enter Country code (ISO-3166), <ctrl-I> for supported list: cn———————控制器所在国家代码,此选项影响
You have chosen Country for China (yes|no)?: yes 可用RF channel及功率参数
Enter Time Zone [PST-8:0]: UTC8:0——————————————-时区系统(UTC、PST等)及所在时区
Enter Time in UTC [06:07:59]: 6:11:30——————————————所选时区系统的标准时间而不是本地时间,
Enter Date (MM/DD/YYYY) [8/14/2011]: 否则控制器的时钟可能就不对了。
Enter Password for admin login (up to 32 chars): ******
Re-type Password for admin login: ******
Enter Password for enable mode (up to 15 chars): ******
Re-type Password for enable mode: ******
Do you wish to shutdown all the ports (yes|no)? [no]:
Current choices are:
System name:
VLAN 1 interface IP address:
VLAN 1 interface mask:
IP Default gateway: none
Switch Role: master
Country code: cn
Time Zone: UTC8:0
Ports shutdown: no
If you accept the changes the switch will restart!
Type <ctrl-P> to go back and change answer for any question
Do you wish to accept the changes (yes|no)yes
Creating configuration... Done.
System will now restart!
Shutdown processing started
恢复出厂设置-无线控制器
mand的区别:
(Aruba3400) #write erase
All the configuration will be deleted. Press 'y' to proceed :
Write Erase essful
(Aruba3400) #
(Aruba3400) #write erase all
Switch will be factory defaulted. All the configuration and databases will be deleted. Press 'y' to proceed :
(Aruba3400) #
(Aruba3400) #
(Aruba3400) #reload
Do you really want to reset the system(y/n): y
System will now restart!
write erase只删除配置文件。而write erase all将删除配置文件、控制器内部数据库及license,将控制器重置为出厂状态。
恢复出厂设置-Aruba AP
连接AP console口至串行通讯终端(9600bits/s, 8-N-1)。
加电启动AP。
APBoot (build 22797)
Built: 2009-11-04 at 15:53:54
Model: AP-10x
CPU: AR7161 revision