文档介绍：摘要
本次设计为高速公路综合设计路段,此路段位于烟台境内,根据设计公路的交通量、地形特征以及使用任务和性质,确定公路等级为高速公路。在此基础上,结合沿线自然条件与主要技术指标,进行路线方案论证与比选,最终确定一个最佳方案进行详细技术设计。其主要内容包括:路线的平、纵、横设计,路基、路面设计和排水设计以及交通设施设计, 并完成施工图设计阶段应完成的各种图、表及设计说明书。本设计严格依据规范的各项指标进行,最后确定本高速公路设计速度为100km/h,路基宽26m,双向四车道,,路面为沥青混凝土面层,厚18cm,全线共设计了2个平曲线、3个竖曲线、1条隧道、6个钢筋混凝土通道。
关键词高速公路;平曲线;竖曲线;路基;路面
Abstract
This express section is located at the east of Chongqing province,which is heavy highland to the requirements of mountain highway design, the grading of express is based on the traffic volume, the use of task and nature. Then, bining natural conditions along and the main technical indicators, evaluating and electing the route, this express section ultimately determine the best option for a detailed technical design. Its main contents include: plane design, vertical curve design, transect curve design, roadbed design, road surface design, drainage design and traffic facilities design. In addition, all kinds of the figures, tables, and specifications are given in detail in this paper. After conducting technical feasibility studies accord to specification, the designing velocity is 100 km / h. The width of the roadbed is 26 meters with four two-way lanes. The length of the road is . The road’s surface is paved by asphalt concrete. There are two plane curves, two vertical curves, a total of two bridges, five reinforced concrete channel.
Keywords Express;Plane curve;Vertical curve;Roadbed;Pavement
目录
摘要 I
ABSTRACT II
目录 III
1 绪论 1
设计要求及任务 1
设计要求 1
设计任务 1
沿线地形、地质、气候特征 2
气候特征 2
2
2 方案拟定与比选
设计资料 2
道路技术等级的确定 3
有关技术标准汇总 5
3 路线方案具体比选 6
路线选线的原则 6
路线选线的过程 7
方案对比 7
4 路线设计 9
平面设计 9
直线 9
圆曲线 9
缓和曲线 9
纵断面设计 10
纵断面设计的作用和基本要求 10
最大纵坡 11
最小纵坡 11
坡长限制 11
设计示例 12
平、纵线形组合设计 13
平、纵线形组合的一般设计原则 14
平纵组合的一般要求 14
5 路基横断面设计 15
路基横断面设计 15
横断面的组成 15