文档介绍：27 6 27 6
第卷第期光电技术应用
2012 12 DecemberVol. ,
年月 ELECTRO-OPTIC TECHNOLOGY APPLICATION ,
·光电器件与材料·
光纤光栅金属化工艺及特性研究
姚文历 1,管从胜 1,王静 2,王宁 2,隋青美 2,王正方 2
(,山东济南 250061;,山东济南 250061)
摘要:以石英光纤光栅为基体材料,采用化学镀镍和电镀铜相结合的工艺制备金属化光纤光栅。采用胶体钯活化法进行
光纤光栅的活化处理,通过研究预处理粗化时间、活化时间与活化温度关键参数等对镍磷合金镀层结合强度和连续性等性能的
2~10 min 30~40 ℃ 20 min
影响,确定了最佳工艺条件:室温下粗化时间,活化温度,活化时间,在石英光纤表面得到了连续、致密、
均匀、光亮和附着力强的镍镀底层。采用电镀法在镀镍光纤光栅上继续镀铜,得到了具有高附着力、低电阻和良好焊接性能的金

属化光纤光栅。对镀铜光纤进行温度性能测试,发现镀铜处理后的光纤光栅温度灵敏系数是普通光纤光栅的倍。
关键词:光纤光栅;化学镀;酸性镀镍;电镀铜
: TN253 A 1673-1255 2012 06-0046-05
中图分类号文献标识码: 文章编号: ( )
Research on Surface Metallization of Optical Fiber Grating and Characteristic
YAO Wen-li1 GUAN Cong-sheng1* WANG Jing2 WANG Ning2 SUI QING-Mei2 WANG Zheng-fang2
, , , , ,
1. 250061 2
( College of Chemistry and Chemical Engineering, Shandong University, Jinan , China; . Optical Fiber
Sensor Technology & Engineering Research Center, School of Control Science and Engineering, Shandong University,
250061
Jinan ,China)
Abstract:With the quartz fiber as the matrix materials, the copper-plating quartz optical fiber is produced
by electroless nickel-plating and copper electroplating. The influences of pretreatment roughening time activa⁃
tion time, activation temperature on bond strength and continuity of nickel-phosphorus alloy coatings are studied