文档介绍：GE Fanuc Automation
Computer Numerical Control Products
Series 16 / 18 / 160 / 180 – Model C
Operation and Maintenance Handbook
GFZ-62757EN/01 July 1996
Warnings, Cautions, and Notes GFL-001
as Used in this Publication
Warning
Warning notices are used in this publication to emphasize that hazardous voltages, currents,
temperatures, or other conditions that could cause personal injury exist in this equipment or
may be associated with its use.
In situations where inattention could cause either personal injury or damage to equipment, a
Warning notice is used.
Caution
Caution notices are used where equipment might be damaged if care is not taken.
Note
Notes merely call attention to information that is especially significant to understanding and
operating the equipment.
This document is based on information available at the time of its publication. While efforts
have been made to be accurate, the information contained herein does not purport to cover all
details or variations in hardware or software, nor to provide for every possible contingency in
connection with installation, operation, or maintenance. Features may be described herein
which are not present in all hardware and software systems. GE Fanuc Automation assumes
no obligation of notice to holders of this document with respect to changes subsequently made.
GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory
with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or
usefulness of the information contained herein. No warranties of merchantability or fitness for
purpose shall apply.
©Copyright 1996 GE Fanuc Automation North America, Inc.
All Rights Reserved.
SAFETY PRECAUTIONS
1
SAFETY PRECAUTIONS
2
This section describes the safety precautions related to the use C
units. It is essential that these precautions be observed by users to 3
ensure the safe operation of machines equ