文档介绍：ISO 国际阻燃、防火测试标准 ISO 340:2004: 传送带-燃烧性能-要求和测试方法 ISO 340:2004: Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method Abstract 摘要 ISO 340:2004 specifies a method for assessing, on a small scale, the reaction ofa conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts. ISO 834-1: 阻燃测试-建筑材料-第 1 部分:一般要求 ISO 834-1: Fire-Resistance Tests - Elements of Building Construction - Part 1: General Requirements Corrigenda, Amendments and other parts - ISO/TR 834-2:2009 - ISO/TR 834-3:1994 - ISO 834-4:2000 - ISO 834-5:2000 - ISO 834-6:2000 - ISO 834-7:2000 - ISO 834-8:2002 - ISO 834-9:2003 ISO 871:2006 塑料使用热炉点燃温度的测定 ISO 871: plastics test standard includes information about the determination of ignition temperature using a hot-air furnace Abstract 摘要 ISO 871:2006 specifies a laboratory method for determining the flash-ignition temperature and spontaneous-ignition temperature of plastics using a hot-air furnace. It is one ofa number of methods in use for evaluating the reaction of plastics to the effects of ignition sources. The method described does not give a direct measure of bustibility or rate of burning ofa material or any definition of the safe upper limit of temperature for the plastics in use, and is not intended to be used alone to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements ofa fire hazard or fire risk assessment which takes into account all of the factors pertinent to an assessment of the fire hazard ofa particular end use. Tests made under conditions of this method can be of considerable value paring the relative ignition characteristics of different materials. Values obtained represent the lowest ambient air temperature that will cause ignition of the material under the conditions of this test. Test values are expected to r