文档介绍:1 3 ICS Q 31 Record No.: 24229-2008JC Standard of Building Material Industry of the People ’s Republic of China JC/T 764-2008 In place of JC/T 764-2001 WC Seats and Covers Given Free by Issue Department of Build Material Standard 010-51164708 Issued on June 16, 2008 Implemented on December 1, 2008 Issued by National Development and mission of the People ’s Republic of China JC/T 764-2008 2 Preface The amendment to th is standard has adopted the American Standard Plastic WC Seats and Covers (ANSI Z -1997). Th is standard isa revision of the Plastic WC Seats and Covers (JC/T 764-2001). The main differences of th is standard parison with ANSI Z -1997 are as follows : - Add special performance specifications and test methods on the WC seats and covers made of wood, composite material and resin; - Add definitions, technical requirements and test methods on slow fall down WC seats and covers; - Add requirements on static load, moisture resistance, and cold-hot fatigue; - Employ the requirements for public use for unrecoverable bend amount. The main variations made in th is standard parison with JC/T 764-2001 are as follows : - Add dimensional requirements and test methods; - Add technical requirements and test methods on soft close type WC seats and covers; - Add special performance specifications and test methods on the WC seats and covers made of wood, composite material and resin; - Eliminate the classifications of public use and domestic use for unrecoverable bend amount, but the technical requirements is the same as that for public use; - Add requirements on static load, moisture resistance, and cold-hot fatigue. The Appendix A and Appendix B in th is standard are normative. Th is standard replaces JC/T 764-2001 from the date of implementation. Please note that certain content of th is standard might be involved with patents, the recognition of which shall not be the responsibility of the agency issu ing th is standard. Th is standard is proposed